.xx: .01 2 .xxx: .005 .xxxx: .0020 decimals angles tolerances are: unless otherwise specified, dimensions are in inches. any rev made to this print must be have an updated mkt print other assembly packaging process tooling component non standard x do not scale from this print .155 3.94 ref .073 1.85 ref .442 11.23 ref "a" "a" 1 5 2 4 c .004[0.10] .105 2.67 ref .420 10.67 ref 1.050 26.67 .155 3.94 ref .460 11.68 ref .295.020 7.490.51 .020 0.51 .980 24.89 .350 8.89 ref .250 6.35 .900 22.86 ((19 pos -1)x.0500[1.270]) 01 19 a b c d e f c c c item no. part number quantity material 1 asp-103598-03-b 1.0000 ul 94v0, color: black 2 asp-103599-01-b 1.0000 ul 94v0, color: black 3 t-1r27-12b-h-1 114.00 brass alloy 260, 3/4 hard 4 sdb-030-9653 114.00 lead free composite 96% tin 5 k-850-650 .89000 polyimide film 6 ct-asp3112ms .00571 conductive polymer .016 ref (typ) 0.41 .083 2.11 .357 9.06 .417 10.59 ref .005 0.13 .100 2.54 ref 2 max sway (either direction) 'c' section "a"-"a" 3 c c c sheet of vita 42 (lead free) socket assembly by: ASP-153860-01 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing j. browning 03/04/2010 2 1 sheet scale: 3:1 f:\dwg\misc\mktg\ASP-153860-01-mkt.slddrw plating: contact area: .000030 gold over .000050 nickel remainder: .000003 gold over .000050 nickel notes: 1. 6 row, 19 position not available as standard. use lead free solder balls. 2. represents a critical dimension. 3. maximum burr allowance: .0015[0.038] 4. maximum cut flash: .010[0.25]. 5. maximum allowable bow: top/bottom: .006[0.15], side/side: .003[0.08]. 6. parts to be packaged in tape & reel. for qty's less than 125 pcs, no trailer or leader will be supplied. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision h
.0210 [0.533] .250 6.35 .900 22.86 trace .0100 [0.254] free od solder mask .0310 [ 0.787] pad .0200 [ 0.508] via (plated) .0100 [ 0.254] 45 see detail 'b' detail 'b scale 12:1 recommended board layout scale 4:1 f e d c b a 19 01 .008.002 0.200.05 detail 'c' scale 10 : 1 1.732 44.00 ref .945 24.00 ref "j" "j" user direction of un-reeling pocket not detailed section "j"-"j" scale 1 : 1 packaging view scale 1:1 .900 22.86 .250 6.35 .050 1.27 (typ) .050 1.27 (typ) .0250 0.635 (typ) 01 19 recommended stencil layout stencil to be .0060[0.152] thick a b c d e f sheet of vita 42 (lead free) socket assembly by: ASP-153860-01 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. j. browning 03/04/2010 2 2 sheet scale: 3:1 f:\dwg\misc\mktg\ASP-153860-01-mkt.slddrw revision h 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
